Detectmat Fire Alarm System
Detectmat Fire Alarm System

DETECTOMAT Fire Detection and Alarm Systems

Found in 1977, Detectomat GmbH has quickly been recognized as a manufacturer of the highest quality and advanced fire system equipment among the companies producing in Germany.

With the Detectomat fire system, you get reliable solutions for different types of implimentations. Detectomat offers ideal solutions for all kinds of applications from small to large, standard to complex, due to its product range.

Detectomat products offer safe and rational solutions with flexible, modular, open system architecture that can meet all kinds of needs for designers and applicators.

Our Detectomat products comply with the European Union standard EN54 and are VDS certified.

detectomant_yangin

Detectomat Fire Alarm System Supremacy and Key Solutions for its Application

  • 100% Germany manufacture / German technology
  • Interactive, Electronic Addressable System
  • 15 Loops in one control panel / 1890 Address capacity
  • Dual microprocessors in control panels (100% back-up - redundant operation)
  • 2x0.8mm cable with 3.500m loop distance
  • MODBUS IP / MODBUS RTU open protocol communication support
  • Third party systems with integration
  • TCP/IP WEB based panel front face simulation with remote Access
  • Remote access in control panels, panel front face simulation, online notification to 3
  • different addresses via e-mail in case of alarm / malfunction
  • EN 54 approved or unapproved networks to establish appropriate structure
  • Expanded network possibilities for widely distributed or complex buildings industrial RS-
  • 485, TCP / IP, Fiberoptic communication technology
  • Easy and intuitive to use in order to take the right action in the case of an event / incident
  • Complex controls can be performed directly from panels and network
  • Safe and easy commissioning thanks to automatic configuration
  • Easy and fast setup with I-Check electronic mapping software
  • Widespread variety of detector options suitable for all kinds of project and area
  • By means of the technology of Fusion®, Humitec® and Seal Protect®
  • unmatched detection reliability and protection against false alarms
  • Decorative detector choices (with glass, metal body, etc.)
  • Wireless fire detection for buildings with historical value, aesthetic or
  • architectural restrictions, or temporary installation
  • Aspirating smoke detectors with air sampling for ventilation channels
  • Hazardous area products for explosive areas
  • Internal short circuit isolator selections in all fire detectors and addressable
    devices

Fire Control and Repeater Panel

detectomant_yangin

A fast Linux-based computer unit with a lot of memory space and open interfaces is the operating system of the new generation DC3500 panels. This function makes the DC 3500 open to numerous solution technologies that may be needed in the future, in addition to the benefits of a standard operating system that provides easy maintenance.

Detectomat panels have various fire control panel options for different needs. From simple applications to complex applications, it is possible to fulfill various requirements.

Control panels can expand from 1 Loop 126 Address capacity to 15 Loop 1890 Address capacity. The loop cards can work independently and each loop card has 2 microprocessors dedicated to it. In this way, it meets the EN54 requirement as a standard even in systems larger than 512 addresses.

detectomant_yangin

All the system messages and trigger alarms are controlled by fire control panels. Each model has simple user interfaces designed for easy use and text input. This makes the control panels simple to use and, in the event of an incident, a secure and specific system of action is created. In critical circumstances, especially in stressful emergencies, the variable intervention area ensures that the responsible person holds the correct action.

A large color touch screen, new features and an intuitive control unit with an advanced ergonomic design are available for the DC3500.

 

  • Different body SL, ML, E
  • Color touch screen
  • Possibility to expand from 1 Loop 126 Address capacity to 15 Loop 1890 Address capacity
  • Programming the detector zone up to 1890
  • Event log memory for 100,000 messages
  • 10,000 programs
  • Configuration tool
  • DPT programming software with integrated compliance with standards
  • BMS interface, MODBUS IP / MODBUS RTU open protocol communication support
  • Update via DPT
detectomant_yangin

The DC3500 has interfaces that can connect the system to any peripheral device users need.

Tam entegre dağıtılmış sistem yapısı, sistemi farklı boyutlardaki projeler için gelecekteki genişletme seviyelerinde esnek bir şekilde tasarlamamızı sağlar.

detectomant_yangin
detectomant_yangin

The fully integrated distributed system structure enables us to build the system flexibly for potential levels of expansion for projects of various sizes.All fire control panels can be used alone or networked. It is possible to install EN 54 certified networks on each panel, thanks to RS485 and Ethernet technology. To monitor and control

The DC 3500 fire control panels remotely, remote display and control units can be used.
It is possible to replicate the entire front surface of the DC 3500 fire control panel with displays and LEDs, including pre-labeling, and to conduct fire control system status monitoring in compliance with EN 54-2. Simple and intuitive operation and control of the DC 3500 is provided by the 7 inch touch screen.

detectomant_yangin_
  • User-friendly display with status indicator for EN 54-2 fire alarm systems
  • Easy and intuitive use and control via touch screen
  • 7 "high resolution monitor (1024 x 600 pixels) with maximum color resolution
  • Display brightness 500 cd / m²
  • Operation via PoE (Power over Ethernet) interface
  • Micro SD card slot
  • ARM Cortex-A9 32-bit multi-core processor
  • Scalable embedded Linux operating system
  • Integrated loudspeaker for emitting sound and audio signals
  • PoE injector for voltage and data transmission over network cables for installation on the DC3500 Max.7W low power consumption)
detectomant_yangin
  • Software-based integration between Fire, Access, IP CCTV and other security systems,
  • Graphical monitoring / management software and hardware,
  • Software reset, disable-enable, buzzer off etc. the ability to fulfill the features,
  • Point-based alarm, fault, disable-enable monitoring via software,
  • Automatic transfer of the camera image of the relevant point from the fire situation to the alarm monitor in software,
  • System retrospective event memory,
  • Fire point and zone information,

SCADA/BMS Integration

Detectomat control panels have MODBUS IP / MODBUS RTU open protocol communication support. With communication interfaces, communication protocols like BACnet and LonWorks can be used. In this way, fire and safety data from fire stations and each field device can be integrated without any point constraint into BMS / Scada systems and several scenarios can be applied using this information, including emergency control operations.

detectomant_yangin

Detectomat fire systems can be 100% integrated with other weak current systems in your building.

Maintenance-Operation-Service Software

detectomant_yangin

The electrical map of all electronic addressable field devices and the electrical link paths to each other can be viewed using the I-Check program.

The I-Check program automatically identifies defective equipment, line short circuit or line damaged faults, dirty loop line detectors, and allows the user to quickly locate and repair potential faults. In this way, you can graphically analyze the status of all electronic addressable field elements in detail.

With I-Check, the maintenance-operation-service software, installation failures can be detected quickly. In this way, commissioning processes in Detectomat systems are simple and short.
 

Adressable Field Elements

detectomant_yangin

With modern technology-based systems capable of detecting multiple fire signs and having algorithms to analyze this information according to various locations and environmental conditions, fast fire detection and warning without false alarms is possible today.

Detectomat fire detectors, thanks to smart technology, provide fast and accurate detection. The family of Detectomat smart detectors can meet the requirements of all forms of environmental conditions. From hazardous areas to high-capacity warehouses, special detectors are available for various building types.

Key features of Detectomat Interactive fire alarm system:
Detectomat fire detection and alarm systems are automatic addressable interactive systems.
- Field elements (detector, button and modules) are microprocessor controlled.
- There is bidirectional communication and interactive operation feature between the fire alarm control panel and field elements (detector, module, button).
- Detectors decide the alarm situation by using advanced decision making algorithms based on artificial intelligence.
- It is possible to install an algorithm specific to the location they protect on the detectors.
- Interactive fire alarm system contains a microprocessor within each detector with loaded fire characteristics, and the detector evaluates the development of smoke and/or temperature and decides on the status of the alarm, transmits this information to the control panel, decides the final state of the panel and activates the fire scenario.
- With a wide range of detector and system accessories, functionality and stable operation are provided in all kinds of architectural structures and environmental conditions, while flexibility is provided to the design and practitioner.
- There are special detector solutions for smoking rooms / condensation effect. Thanks to its technological advantages, OTI Fusion detectors can detect inputs such as cigarette smoke and condensation and prevent false alarms.
- In the Detectomat fire system, all 126 addresses in a loop line can consist of detectors, buttons or modules. The absence of device / number limitation on the loop line provides flexibility and ease of configuration in system designs.

Algorithm Based Intelligent Interactive Detectors

detectomant_yangin From extreme conditions to high risk systems, Detectomat provides a broad variety of unique detector solutions. Even in harsh environments, such as hangars, engine test beds, refineries, flour mills, data centers or high capacity warehouses, these products provide fast and effective fire detection.
Detectomat can be used in large and high ceiling areas such as wood and plastic warehouses. In these areas, the fire may start with the accumulation of smoke or heat, and the concentration of carbon monoxide in the environment may increase as a result of burning. In such cases, a solution can be provided for CO detection in addition to fire outputs. (PL 3300 COBT) detectomant_yangin OTi detector series, which is among the Detectomat special detector solutions, is a versatile fire detector. Intelligent multi-sensor optical-thermal detectors are the ideal option to detect flames early and accurately, even in harsh environmental conditions. The technology of multi-sensors makes the detectors insensitive to interference. Multi-sensor technology analyzes and algorithmically compares the findings of distinct light spectra. This facilitates the identification of flames at an early stage. detectomant_yangin Thanks to its technological advantages, OTI Fusion detectors can detect inputs such as cigarette smoke and condensation and prevent false alarms
  • Very fast reaction in detecting hydrocarbon fires with Multi-Spectrum Analysis
  • Filtering false alarm sources such as cigarette smoke and condensation effect
  • 5-dimensional advanced sensing consisting of 1 Optical, 2 Temperature and 1 Humidity sensor
  • Enhanced dust immunity, high performance in dusty environments

detectomant_yangin

Different detector solutions from Detectomat provide special design detectors and color choices according to the needs of different architectural spaces. In this way, various types of detectors appropriate for different colors and architecture requested by the company can be used in projects such as hotels and prestigious buildings.

detectomant_yangin

Manual Call Points

detectomant_yangin

According to EN 54-11, Type A (single acting) - Glass Breaking Type and Type B (double acting) - manual alarm button types are available in different types and colors or suitable for external environment conditions.
All button options include an integrated isolator and an outlet for a T-connection.

Smart Interactive Input, Output, Sounder Control Modules and Conventional Detector Connection Module

Modules include single-type case solutions in 1 Input, 1 Input + 1 Output, 2 Input + 2 Output configurations. All modules have a built-in bidirectional isolator.

detectomant_yangin

  • Fire suppression function
  • Partition functions (e.g. smoke or fire doors)
  • Smoke control function
  • Voice evacuation function;
  • Vent shut-off
  • Elevator control
  • Security doors - Control of Siren and Flasher lines
  • BDM module for conventional fire equipment connection

Audible / Illuminated Alarm Warning Devices

Detectomat provides high-performance products that can fulfill all kinds of requirements for electronic siren and strobe solutions for designers and applicators.

Our Detectomat siren and beacon products comply with the European Union norm EN54-3 and EN54-23 and are VDS certified.

Detectomat sound / light alarm devices have different mounting and color options for addressable and conventional applications, both for suspended ceiling and wall type applications. Detectomat sound/light alarm devices, both for suspended ceiling and wall style applications, have different mounting and color choices for addressable and traditional applications.

Conventional Products:

detectomant_yangin

Adressable Products:

detectomant_yangin detectomant_yangin

Special Detector Solutions:

Detectomat special detector portfolio includes the following products:

  • For areas of highly flammable materials
  • Linear smoke detectors for areas with limited access
  • Smoke detection with active air suction specially developed for very sensitive areas
  • Products for hazardous areas
  • Wireless fire detection for historically valuable buildings, aesthetic or architectural limitations or temporary installations
  • Aspirating smoke detectors for ventilation ducts.

 

Detectmat Fire Alarm System Some of Our References
INFORMATION REQUEST FORM