Detectomat Fire Detection and Alarm Systems

Detectomat Fire Detection and Alarm Systems

Detectomat fire detection system, preferred by Matriks in its projects, provides reliable, flexible and modular solutions for buildings of different scales and complexity. Developed for hotels, residences, shopping malls, industrial facilities, logistics warehouses and high-risk areas, the Detectomat fire alarm system stands out with its next-generation addressable fire detection system architecture and advanced integration capabilities.

The entire product range covers addressable detectors, addressable fire alarm panel options, manual call points, modules, sounders/beacons and special detector solutions. Thus, under a single brand, all fire detection and alarm systems needs are met end-to-end and a scalable, standards-compliant fire safety infrastructure is created in projects. This structure offers a long-term and investment-friendly solution especially in corporate addressable fire detection system applications.

Advanced System Topology and Integration

The Detectomat fire detection system has an advanced system topology that supports all integration scenarios required in modern buildings. In this way, fire detection and alarm systems can be managed from a single center together with building automation and security infrastructures and BMS/SCADA integration can be achieved easily.

• Thanks to MODBUS IP / MODBUS RTU open protocol communication support, it enables easy integration with BMS, SCADA, HVAC, lighting and other building automation systems.
• It operates with third party systems and other ELV infrastructures with 100% compatibility.
• Through control panels, remote access, panel interface simulation and e-mail notification to three different addresses in case of alarm/fault are available.

Thus, the Detectomat fire alarm system offers a corporate-grade, integrated fire safety architecture both at field device level and at centralized management level, increasing the manageability and visibility level in addressable fire system projects.

OTi Fusion Multi Spectrum Detector Technology

Especially in hotel and residential projects where smoking is allowed, standard smoke detectors carry a high false alarm risk. Detectomat OTi Fusion multi-spectrum detectors analyze the type of smoke at different wavelengths and can distinguish cigarette smoke from real fire smoke, significantly reducing false alarm probability.

Thus, no alarm is raised for cigarette smoke, while smoke produced in a real fire is detected in a very short time. The integrated humidity sensor on the detector also prevents false alarms caused by condensation. The OTi Fusion series combines accurate detection, high reliability and false alarm immunity, elevating addressable fire detection system performance to the next level and making the Detectomat fire detection system a preferred solution especially in comfort-oriented projects.

Unique Advantages of OTi Fusion

• OTi Fusion technology provides exceptional detection reliability and outstanding protection against false alarms.
• By analyzing different light spectrums, it algorithmically correlates the data and distinguishes fire types with high accuracy.
• With multi-spectrum analysis, it detects hydrocarbon-based fires with a very fast response time.
• It filters cigarette smoke, condensation and other parasitic effects, minimizing the likelihood of false alarms.
• It features a 5-dimensional advanced detection technology consisting of 1 optical, 2 temperature and 1 humidity sensor.
• Thanks to its enhanced dust immunity, it offers high performance even in dusty environments.
• Innovative OTi Fusion technology has been awarded the “GIT Security Design Award”.
• It incorporates patented Humitec® technology developed to prevent false alarms caused by condensation and humidity.

Detectomat Fire Alarm System Advantages and Key Solutions

Detectomat fire detection and alarm systems offer long-lasting and reliable solutions with German engineering and full compliance to EN54 series European standards. The addressable fire detection system architecture provides high reliability and operational continuity even in large and complex projects.

• 100% made in Germany with German technology.
• Interactive, electronic addressable system architecture ensures high performance and reliability.
• Expandable structure with up to 15 loops / 1890 addresses on a single control panel.
• Panels are equipped with dual-microprocessor (redundant operation) technology.
• Supports loop lengths up to 3,500 meters using 2x0.8 mm cable.
• Provides MODBUS IP / MODBUS RTU open protocol communication support.
• Enables full integration with third party systems and other ELV systems.
• Offers web-based remote access via TCP/IP and panel interface simulation.
• In case of alarm or fault, e-mail notification can be sent to three different addresses.
• EN54 approved network structures can be extended via RS-485, TCP/IP or fiber-optic infrastructures.
• Complex control scenarios can be executed directly via panels or over the network.
• Automatic configuration enables safe and fast commissioning.
• I-Check electronic mapping software ensures fast and practical system setup.
• Offers a wide range of detector options suitable for every project.
• Fusion®, Humitec® and Seal Protect® technologies provide unmatched protection against false alarms.
• Decorative detectors (glass, metal body etc.) meet architectural and aesthetic requirements.
• Wireless fire detection solutions protect architectural integrity in historical or temporary structures.
• Aspirating/air sampling detectors provide high sensitivity in ventilation ducts.
• Provides special detector solutions for hazardous areas (Ex-proof zones).
• All detectors and addressable devices feature an internal short-circuit isolator.

Thanks to these advantages, the Detectomat fire alarm system becomes a corporate-grade fire safety solution that is confidently preferred in both new installations and retrofit projects, meeting technical and operational expectations in the fire detection system selection process.

DC3500 Fire Control Panels and Repeater Panels

The new-generation DC3500 fire control panel operates on a fast Linux-based operating system with high memory capacity and open interfaces. This structure offers easy maintenance while ensuring full compatibility with future software and system developments and helping keep the addressable fire detection system architecture up to date in the long term.

Detectomat provides addressable fire alarm panel options that can be scaled from 1 loop (126 addresses) up to 15 loops (1890 addresses) for projects of various sizes. Each loop card operates independently and is equipped with a dual microprocessor. Thus, EN54 standards are fully met even in systems with more than 512 addresses.

The DC3500 series panels provide a scalable and highly reliable solution for all types of applications, from small installations to large and complex buildings. This structure protects the investment in addressable fire detection system projects for the future and allows the system capacity to grow in parallel with the project.

• Available in different enclosure types: SL, ML and E.
• Provides easy and intuitive operation with a color touch screen.
• Offers expansion from 1 loop (126 addresses) up to 15 loops (1890 addresses).
• Has programming capacity up to 1890 detection zones.
• Includes 100,000 event log and 10,000 programming memory.
• DPT configuration software enables fast and standards-compliant system programming.
• Provides BMS integration and MODBUS IP / MODBUS RTU open protocol support.
• Software updates can be easily performed via DPT.

Distributed Network Architecture and Remote Display Units

The DC3500 control panel is equipped with versatile interfaces that allow the system to be connected to any desired peripheral devices. The fully integrated and distributed system architecture provides a flexible structure that can adapt to future expansion needs in projects of various scales and forms the backbone of the EN54 certified network infrastructure.

All DC3500 fire control panels can operate as standalone units or be networked via RS-485 or Ethernet to form EN54 certified network structures. Remote display and control units enable panels to be monitored and managed from remote points.

The front of the panel, including the screen and LED indicators, can be duplicated and used to provide EN54-2 compliant status indication. The 7-inch touch screen allows the system to be controlled easily, intuitively and in a user-friendly way.

• EN54-2 compliant, status-indicating and user-friendly display design
• Easy and intuitive operation via touch screen
• 7” high-resolution monitor (1024×600 pixels) and 500 cd/m² brightness
• PoE (Power over Ethernet) support for data and power over a single cable
• Micro SD card slot for easy data logging and software updates
• ARM Cortex-A9, 32-bit multi-core processor
• Scalable embedded Linux operating system
• Integrated speaker for audible alerts and notifications
• PoE injector (max. 7W low power consumption) for practical installation and energy efficiency

Software-Based Integration and Graphical Monitoring

The Detectomat fire alarm system enables fire detection and alarm systems to be managed from a single screen via software-based monitoring and control solutions. Thanks to graphical interfaces, operators can make quick and accurate decisions and all steps of the fire scenario can be monitored in real time.

• Provides software-based integration with fire, access, IP CCTV and other security systems.
• With a graphical monitoring and management software, the entire system can be controlled from a single screen.
• Operations such as reset, disable/enable and buzzer off can be performed remotely via the software.
• Offers point-based monitoring of alarms, faults and disabled statuses.
• In a fire event, the camera image of the relevant point is automatically displayed on the alarm screen.
• The historical event log allows system records to be reviewed retrospectively.
• Detailed information on fire location and zone data can be displayed.

SCADA / BMS Integration

Detectomat control panels provide MODBUS IP / MODBUS RTU open protocol communication support. They are also compatible with protocols such as BACnet and LonWorks. In this way, the addressable fire detection system can be directly integrated into existing or newly planned building automation infrastructures.

Panels can therefore integrate fire and security data without point limitation from all field devices into BMS/SCADA systems. The resulting data can be used effectively for emergency control operations and automatic scenario management; for example smoke extraction, elevator park position, automatic opening/closing of security doors and similar scenarios can be triggered automatically.

Detectomat fire systems can operate 100% compatible and fully integrated with all ELV systems in your building. Thus, security, access control, CCTV, lighting and building automation systems can be managed from a single control center, making the fire detection system one of the backbone components of the project.

Maintenance–Operation–Service Software (I-Check)

I-Check software can graphically display the electrical map of all addressable field devices and their connection paths. This structure significantly accelerates maintenance–operation–service processes in projects and reduces the operating costs of the addressable fire detection system.

The system automatically detects faulty devices, short circuits or line breaks and contaminated detectors on the loop. The user can easily locate and remedy potential faults and review the status of all devices in detail.

As a maintenance–operation–service software, I-Check provides rapid fault diagnosis and easy commissioning; it simplifies and accelerates installation and operation processes in Detectomat systems. As a result, the total cost of ownership of fire detection and alarm systems is reduced and long-term stable operation is supported.

Addressable Field Devices and Interactive System Architecture

Modern technology enables intelligent algorithm-based systems that can detect multiple fire indicators and evaluate them according to environmental conditions, making fast and false-alarm-free fire detection possible.

Detectomat fire detectors use this technology to deliver fast, reliable and stable detection under varying environmental conditions. There are special detector solutions available for all building types, from hazardous areas to high-capacity warehouses, making the addressable fire detection system a truly project-specific solution.

Features of the Detectomat Interactive Fire Detection and Alarm System

• Automatic addressable interactive system architecture
• Microprocessor-controlled field devices (detectors, call points, modules)
• Bi-directional communication between panel and field devices and fully interactive operation
• AI-based decision algorithms enabling detectors to make alarm decisions autonomously
• Possibility to define a custom fire detection algorithm for each room/area
• Distributed intelligence: each detector analyzes fire characteristics locally.
• Detectors evaluate smoke and/or temperature development and pass the alarm decision to the control panel; the panel then automatically executes the fire scenario.
• Wide range of detectors and accessories offering design flexibility for different architectural conditions
• Special detector solutions for smoking areas and spaces with condensation risk
• OTi Fusion detector technology detects and filters false alarm sources such as cigarette smoke and condensation.
• Up to 126 devices per loop (detectors, call points or modules).
• No device limitation on the loop structure, providing high flexibility and easy configuration in projects.

Algorithm-Based Intelligent Interactive Detectors

Detectomat offers a wide range of special detector solutions for environments from extreme conditions to high-risk buildings. These detectors detect fire quickly and reliably in challenging environments such as hangars, engine test areas, refineries, flour mills, data centers and high-capacity warehouses.

They can also be used effectively in large, high-ceiling areas such as timber and plastic warehouses. In addition to fires that develop rapidly due to smoke or heat accumulation in such areas, special models such as PL 3300 COBT can also detect increases in carbon monoxide (CO) in the environment. Thus, Detectomat systems evaluate heat, smoke and gas parameters together to ensure maximum safety.

The Detectomat OTi detector series consists of intelligent optical-thermal multi-sensor detectors designed for versatile fire detection. They can detect flames at an early stage reliably even under harsh environmental conditions and play a critical role within the addressable fire detection system.

Multi-sensor technology analyzes different light spectrums and algorithmically correlates the data, providing high immunity to false alarm sources. In this way, fire flames are detected at an early stage and the system delivers a rapid response.

OTi Fusion Detectors and Aesthetic Solutions

OTi Fusion detectors differentiate cigarette smoke, condensation and similar effects thanks to their advanced technology and prevent false alarms. This feature provides significant added value for the Detectomat fire detection system especially in hotel, residence and mixed-use projects and enhances user satisfaction.

• With multi-spectrum analysis they detect hydrocarbon-based fires extremely quickly.
• They filter cigarette smoke and condensation effects as common false alarm sources.
• They feature a 5-dimensional advanced detection technology consisting of 1 optical, 2 temperature and 1 humidity sensor.
• Thanks to enhanced dust immunity, they provide high performance even in dusty environments.

Detectomat offers special detector designs and color options tailored to the needs of different architectural spaces. In this way, hotel, residence and prestigious building projects can use aesthetic detector solutions that match the client’s expectations and architectural design. Considering fire safety and architectural design together, maximum protection is ensured with minimum visual impact on the ceiling.

Manual Fire Alarm Call Points

In compliance with EN54-11 standard, Type A (single-action – break glass) and Type B (double-action) manual alarm call points are available in different types and colors. All call point models have an integrated isolator and T-branch output, ensuring both safe and easy loop connection. Within the addressable fire detection system, these call points act as reliable triggering points in all scenarios requiring user intervention.

Intelligent Interactive Input–Output Modules and Sounder Control

Intelligent interactive input–output, sounder control and conventional detector interface modules provide control and monitoring between the fire detection system and other systems. These modules play a critical role in reliable management of all steps of the fire scenario on site.

They are used to activate warning devices, monitor conventional lines and control sounder/beacon circuits in the event of fire.

• Available in configurations of 1 input, 1 output, 1 input + 1 output or 2 inputs + 2 outputs.
• All modules share a single enclosure type.
• Each module includes a built-in bi-directional isolator to enhance system safety.
• Detectomat system modules provide versatile control functions to manage different scenarios in case of fire:
• Fire extinguishing function
• Compartmentation functions (control of smoke or fire doors)
• Smoke extraction and control function
• Voice evacuation system activation
• Shutting down ventilation systems
• Elevator control
• Control of security doors and sounder/beacon lines
• Integration with BDM modules for connection of conventional fire equipment

Audible / Visual Alarm Notification Devices

Detectomat electronic sounder and beacon solutions offer high-performance notification devices that can meet any requirement of designers and installers. The combined use of audible and visual notifications increases the effectiveness of fire detection and alarm systems and speeds up evacuation processes.

All sounder and beacon products comply with EN54-3 and EN54-23 European Union standards and are VdS certified. Devices are manufactured in addressable or conventional types, compatible with both suspended ceiling and wall mounting, and with various color/design options.

Conventional Products

Conventional sounders and beacons offer economical and reliable solutions particularly in small and medium-scale projects utilizing simple zone-based architectures and support conventional fire detection system applications.

Addressable Products

Addressable sounders and beacons operate fully integrated with the addressable fire detection system and provide point-based control and monitoring. This allows easy tracking of which sounder or beacon is active and enables more effective management of the fire scenario.

Special Detector Solutions and Application Areas

The Detectomat special detector portfolio offers a comprehensive product range tailored to different risk groups and architectural requirements. This enables tailor-made fire detection solutions for both industrial facilities and architecturally sensitive buildings.

• Flame detectors: high-sensitivity detection for areas with easily flammable substances
• Linear beam detectors: ideal solution for long corridors and ceiling voids with restricted access
• Air sampling smoke detectors: special design for ventilation ducts and HVAC systems
• Aspirating smoke detection systems: advanced solution developed for very sensitive and critical areas
• Hazardous area detectors: safe operation in explosive (Ex-proof) environments
• Wireless fire detection systems: architect-friendly solution requiring no structural intervention for temporary or permanent installations in historical, aesthetic or architecturally constrained buildings

Conclusion: A Strong Solution Partner for All Project Types

The Detectomat fire detection system and Detectomat fire alarm system, with their addressable fire detection system architecture, flexible integration capability, software-assisted monitoring and maintenance tools, are corporate-grade solutions that can be confidently preferred in projects of any scale.

Fire detection and alarm systems engineered by Matriks, combined with addressable fire alarm panel options and a rich portfolio of field devices, provide maximum safety and high operational continuity in hotels, residential buildings, industrial facilities, healthcare buildings, logistics warehouses and critical infrastructures. As a result, Detectomat is positioned as a strong and sustainable fire safety solution partner for all project types, holistically addressing technical, aesthetic and operational needs in the fire detection system selection process.